Terms + Conditions
Axis Aerospace Ltd – Terms & Conditions of Supply
Warranty
Section 1: Airframes, Parts & Components
Axis Aerospace Ltd warranties our parts against defects in manufacture for one year from date of purchase. In the case of components supplied by, but not manufactured by Axis Aerospace Ltd, the warranty remains as that provided by the manufacturer of the particular component. Due to the relatively fragile and vulnerable nature of multirotor aircraft systems, and the fact that their safe care, storage, transportation, set up and operation are all entirely beyond our control, Axis Aerospace Ltd offer no warranty beyond that stated above on any component manufactured by or supplied by us.
Section 2: Ready to Fly Aircraft Systems
In the case of Ready to Fly aircraft systems, Axis Aerospace Ltd warranty against fault in assembly of the aircraft for a period of 1 year from date of purchase, subject to the following:
Part 1:
For the warranty to remain valid, the owner must undertake the following:
– Be legally certified and properly trained by an accredited training organisation in the use of multi rotor aircraft systems, general flying safety and air law.
– Fully familiarise themselves with all equipment and components of the aircraft, fully understand their correct set up and use, and ensure for themselves that all components
are installed and set up correctly.
– Conduct a thorough systems and physical aircraft check before each flight, undertake regular maintenance of the aircraft, and keep verifiable records of these procedures.
– Ensure safe and legal use of the aircraft according to regulations in their country, territory or area of operation.
– Ensure correct calibration, adjustment and positioning of all sensors on the aircraft at all times, including but not limited to those that could in any way affect flight performance.
– Ensure compatibility of, and that there is no risk of interference between, any equipment carried by the aircraft and the aircraft systems.
– Ensure the aircraft is not flown over weight, out of balance, or in conditions outside those stated in the specification of the aircraft.
– Ensure solar activity, magnetic anomalies, RF sources and any other situational or external factors that could affect the performance of the aircraft are avoided, and are not allowed to affect the aircraft or any of it’s on board systems.
Part 2:
For the warranty to remain valid, the following conditions must be observed:
No component or part of the aircraft, aircraft subsystems or accessories are removed, altered, adjusted or replaced, and that nothing is added to the aircraft beyond that originally
supplied and fitted by Axis Aerospace Ltd. The only exceptions to this are adjustments that may be required prior to flight as mentioned in pre flight check lists. Normally this will only mean adjustment of cam lever arm locking mechanisms and propeller blade tightness.
Axis Aerospace Ltd provide general guidelines on use and maintenance of the aircraft, however we make no guarantee whatsoever as to the correctness or completeness of said guidelines. Responsibility for this lies solely with the owner.
Whilst we use high quality components in all aspects of construction and installation, we cannot accept any responsibility or liability for the continued correct function of any or all components beyond the time of handover of the aircraft. This includes, but is not limited to, all hardware and software used in the aircraft and its control system.
It is important to note that the warranty on any and all components, whether installed in a complete aircraft system or not, extends only to the individual components themselves, and not to any other part or component affected by any failure or malfunction of any other component(s). In plain language this means that if an aircraft is damaged due to a component malfunction or failure, Axis Aerospace Ltd offers no warranty whatsoever except where a particular component failure or malfunction can be positively identified, and in such a case, warranty only extends to repair or replacement of said component according to the terms stated here.
Axis Aerospace Ltd accept no responsibility whatsoever for the correct function of open source software and firmware used in our aircraft. Use of open source code is inherently risky and therefore use is entirely at the risk of the owner / operator of the aircraft.
Disclaimer:
Due to the nature of multi rotor aircraft, and the fact that their use, set up, software settings, physical and mechanical properties, payload and construction can all be altered by the user, Axis Aerospace Ltd, and it’s associates, partners, officers, employees and assignees, remain completely harmless and free of liability or responsibility for any damage, harm, or claim arising from the purchase, assembly, use, misuse or failure of any product(s) purchased from, or supplied by us. Axis Aerospace Ltd makes no claim of guarantee, warranty or any other claim, expressed or implied, that any item supplied is suitable for any purpose, including the intended purpose. Furthermore, nothing said, written or implied by any person connected with Axis Aerospace Ltd shall invalidate any of the preceding disclaimer. The user assumes all liability for all potential damages or claims that might arise from the use, purchase or handling of any items supplied by or purchased from Axis Aerospace Ltd.
Privacy:
Axis Aerospace Ltd
Ph: +44 1989 555025
eMail: info@axisaerospace.co.uk
Reg Office:
20, Westbury Rd
Warminster
Bath
BA12 0AW
Company Reg Number: 14328441